
Electrical faults
WA smoke alarm and RCD rules when you sell or rent a home
Two rules cover most of it: mains-powered smoke alarms, and at least two RCDs on all power and lighting circuits.
In WA, homes being sold, rented or hired must have compliant mains-powered (hard-wired) smoke alarms. A battery alarm is allowed only in limited cases where hard-wiring is not possible. Homes must also have at least two RCDs, or safety switches, protecting all power and lighting circuits before they are sold or rented.
In general the seller arranges this before the transfer of ownership, and the landlord before the home is rented. An electrical compliance check confirms whether the house meets both rules and tells you what, if anything, needs adding.
What the rules say
The rules come from Building and Energy, part of the WA government. There are two parts.
Smoke alarms
- Homes being sold, rented or hired must have compliant smoke alarms that are mains-powered, meaning hard-wired to the electrical supply.
- A battery-powered alarm is allowed only in limited cases where hard-wiring is not possible.
- Smoke alarms last about ten years, so an alarm that was compliant when fitted may now be past its date.
RCDs
- Homes must have at least two RCDs protecting all power and lighting circuits.
- That applies before a sale, meaning before the transfer of ownership, and before a home is rented.
Two RCDs is the minimum, and the important words are all power and lighting circuits. A board with two RCDs covering some circuits and nothing on the rest does not meet it. Many older Perth boards have one RCD, or none, which is why this rule often means switchboard work. For the official wording, Building and Energy's pages on wa.gov.au are the source.
Who has to arrange it
In general terms:
- Selling. The seller makes sure the home meets the rules before the transfer of ownership.
- Renting. The landlord makes sure the home meets the rules before it is rented. A property manager usually arranges it on the landlord's behalf.
Your contract, settlement agent or property manager can tell you how it applies to your situation. We are electricians, not conveyancers, so we deal with the electrical side and make sure you have the record to show it was done.
Only a licensed electrician may do fixed electrical work in WA, so fitting hard-wired alarms or adding RCDs is not something an owner or a handyman can do.
What a compliance check involves
Our electrical safety and compliance check covers both rules in one visit:
- RCD count and coverage. How many RCDs there are, and whether every power and lighting circuit is behind one.
- RCD testing. Each RCD tested for trip time and trip current with an instrument. The test button only proves the button works.
- Smoke alarms. Each alarm checked for type and power source, tested, and its date read off the unit.
- Switchboard condition. Checked for heat damage, loose terminations and labelling.
- A written record of what was tested and the results.
- A quote for anything missing, before any work is done.
If the house does not comply
The usual findings, and what fixes them:
- Battery alarms where hard-wired ones are required. Mains-powered alarms fitted, in the right positions.
- Alarms past their date. Replaced. See smoke alarm beeping for how to read the date.
- Fewer than two RCDs, or circuits left unprotected. More RCD protection added. On an older board that often means a new board, sometimes with an RCBO per circuit. See ceramic fuses and old switchboards and our switchboard upgrades page.
- An RCD that fails its test. Replaced.
Adding RCD protection to old circuits sometimes shows up faults that were always there, which then trip the new RCD. That is the protection doing its job. It does need fixing before settlement or a new tenancy, which is the main reason to book early.
Timing
Book the check as soon as you decide to sell or lease. If everything passes, you have your record. If something needs adding, there is time to quote it, do it properly and keep the paperwork, rather than squeezing it into the week before settlement.
Buyers can book the same check. Done before settlement, it tells you the state of the switchboard and the alarms while there is still time to raise it with the seller.
For landlords and agencies with more than one property, our property managers page explains how we handle a portfolio, including arranging access with tenants. For a single home, get in touch between 8:30am and 5pm, seven days.
FAQs
Questions on this
What is an electrical safety certificate in WA?
People use the phrase loosely. What the rules require is the alarms and RCDs themselves. What you get from us is a written record of what was tested and the results, plus the compliance paperwork for any work we carry out.
Can I use battery smoke alarms in a rental?
Only in limited cases where hard-wiring is not possible. Otherwise homes being sold, rented or hired must have mains-powered smoke alarms.
How many RCDs does a house need before it is sold?
At least two, protecting all power and lighting circuits, before the transfer of ownership. The same applies before a home is rented.
Who pays for the compliance work?
In general it falls to the seller before a sale and the landlord before a tenancy. Check your contract and the official wording on wa.gov.au, or ask your settlement agent or property manager.
Get a quote
Selling or leasing soon?
Book the check early. If anything needs adding, there is time to do it properly rather than the week before settlement.