
Electrical faults
Burning smell from a power point: what to do now
Treat it as urgent. A burning smell from an outlet means something is overheating, and it does not fix itself.
A burning smell from a power point means something is overheating: the outlet, the plug, or the connection behind it. Stop using it straight away. Switch off at the main switch if you can reach it safely, keep away from the outlet, and call 000 if there is any smoke or flame. Then have an electrician check it before it is used again.
Do not wait to see whether it happens again. The usual causes are a loose terminal, an overloaded adaptor or power board, or a failing plug, and all of them get worse with use. A fishy smell means the same thing as a burning one.
Is it dangerous?
Yes. Treat it as a fault that needs attention today. Act immediately if:
- There is smoke, flame, or the outlet or wall is blackening. Get everyone out and call 000.
- The outlet, plug or face plate is hot to the touch, or the plastic is melting.
- You hear crackling or buzzing, or see sparks.
- Anyone has felt a tingle or shock.
In any of those cases, switch off at the main switch if it is safe to reach, and do not touch the outlet. If the smell is coming from the meter box or the street connection rather than inside, call Western Power on 13 13 51.
What you can safely check
Only once the power is off at the main switch, or if there is no heat and no smoke:
- Switch off and unplug. With the power off at the main, unplug whatever was in the outlet. If the plug is too hot to hold, leave it.
- Look, do not touch. Note any browning, scorch marks or melting on the outlet, the plug pins or the power board.
- Check the plug. Discoloured or pitted pins, or a melted plug body, point at the plug or the outlet contacts.
- Note what was running. Heaters, kettles, air fryers and other high draw appliances on a power board or adaptor are the usual cause.
- Leave it off. Do not use that outlet again until it has been checked, even if everything looks normal.
Do not remove the face plate, and do not try to tighten anything. If you need power to the rest of the house before we arrive, an electrician can isolate the affected circuit for you.
What usually causes it
Loose terminals
The screws that hold the cable in the back of the outlet can loosen over years of heating and cooling. A loose terminal has high resistance, and resistance under load means heat. It often shows up first as a smell, then as browning around one pin hole.
Overloaded adaptors and power boards
A double adaptor or power board makes it easy to run several high draw appliances from one outlet. The outlet, the board and the plugs all carry the combined current, and the weakest point heats up. Heaters are the most common culprit.
Worn outlet contacts
The contacts inside the outlet grip the plug pins. As they wear, the grip loosens, the contact area shrinks, and the joint heats. A plug that falls out easily is a sign.
Failing appliance plugs and cords
A damaged plug, a cracked body, or a cord that has been bent at the plug for years can overheat on its own. Sometimes the smell is the appliance, not the outlet. Treat it the same until it is checked.
What an electrician does
- Isolates the circuit and confirms it is safe to work on.
- Removes the outlet and inspects the terminals, the cable and the box behind it for heat damage.
- Replaces the outlet, and cuts back and reterminates any heat damaged cable.
- Checks the other outlets on the same circuit, because a run of outlets can share the same problem.
- Tests the circuit, checks the load on it, and looks at the switchboard terminations for that circuit.
- Tells you what caused it, and whether the circuit needs more capacity or an extra outlet so the overload does not recur.
When to call
Call 000 for smoke or fire. Otherwise call us the same day for any burning smell from a power point. We work 8:30am to 5pm, seven days. Outside those hours, leave the outlet unused and switched off, switch off at the main switch if there is any heat, and ring us when we open. Our fault finding service finds the cause, and if you need more outlets so you can stop relying on power boards, our power point installation service sorts that out. Contact us with what you noticed.
A burning smell is one of the warning signs covered in electrical fire risks every homeowner should know about. If the outlet is simply dead, see power point not working.
FAQs
Questions on this
Why does my power point smell fishy?
Some plastics used in electrical fittings give off a fishy smell as they overheat. It is a recognised warning sign, and it means the same thing as a burning smell: stop using the outlet and get it checked.
The smell has gone. Is it fixed?
No. The cause is usually a loose or damaged connection that heats under load. It stops smelling when the load stops, and starts again next time. Leave the outlet unused until it has been checked.
Can a power board cause a burning smell?
Yes. Power boards and double adaptors running heaters, kettles or other high draw appliances are a common cause. The plug, the board and the outlet behind it can all overheat.
Should I call 000?
Yes, if there is smoke, flame, or the outlet or wall is visibly burning. Get everyone out first. If there is only a smell, switch off at the main switch if safe and call an electrician.
Get a quote
Smelt burning near an outlet?
Leave it switched off and tell us which outlet, what was plugged in and what you noticed. We will tell you how urgent it is.