
Electrical faults
Power point not working: what to check first
One dead outlet, a whole run of them, or a USB point that has given up. Each points somewhere different.
When a power point stops working, the most common reason is a tripped safety switch or circuit breaker in the switchboard. If nothing has tripped and only one outlet is dead, the outlet itself or the connection behind it has usually failed. If a run of outlets is dead with nothing tripped, there is likely a loose connection at one point in the chain cutting off everything after it.
A dead outlet on its own is not an emergency. A dead outlet with scorch marks, melting, a burning smell or heat is, and you should stop using it straight away.
Is it dangerous?
Stop and get help if any of these apply:
- Scorch marks, browning or melted plastic on the outlet or plug. Switch off at the main switch if safe, and do not use it.
- A burning or fishy smell near the outlet. See burning smell from a power point.
- Crackling, buzzing or sparking when something is plugged in.
- The face plate is warm, or the plug is hot when you pull it out.
- Anyone has felt a tingle. Call 000 for any fire.
What you can safely check
- The switch. Make sure the outlet is switched on at the wall. It sounds obvious, and it catches people out.
- A known good appliance. Plug in a lamp or phone charger you know works. A faulty appliance or power board can look like a dead outlet.
- The other outlets. Check nearby outlets and lights. One dead, or a whole room?
- The switchboard. Open the meter box door and look for a safety switch or breaker in the off position. Reset it once. If it trips again, see safety switch keeps tripping.
- Smart and USB outlets. Some smart outlets have their own reset button or need reconnecting in their app. Check the manufacturer's instructions.
Do not remove the face plate or poke anything into the outlet.
What usually causes it
A tripped safety switch or breaker
By far the most common. An appliance fault, moisture or an overload trips the protection, and every outlet on that circuit goes dead. Resetting once, after unplugging what was running, usually tells you which.
A failed outlet
Outlets wear. The contacts that grip the plug pins lose their spring, the switch mechanism fails, or a terminal works loose. Outlets that have had heavy loads plugged in for years, such as heaters or kettles, wear fastest.
A loose connection in the chain
Outlets on a circuit are connected one after another. A loose terminal at one outlet can cut power to all the outlets downstream, even though they are fine. Finding which outlet is the break is a job for testing equipment.
USB and smart outlets
USB outlets have a small power supply built in, and it can fail while the socket keeps working. Smart outlets can drop off the network or lock up. Both are replaced, not repaired.
Damage behind the wall
A screw or nail through a cable during renovation, pest damage in the roof, or an old joint failing. These often show up as a run of outlets that stopped working after some other work was done.
What an electrician does
- Checks the protection at the board and whether the circuit is live.
- Tests the outlet and the ones either side of it to find where power stops.
- Opens the outlet at the break, checks the terminations for heat damage, and repairs or replaces it.
- Tests the circuit, including the insulation, so the fix is not hiding a second problem.
- Tells you what it was in plain terms, and quotes separately for anything else worth doing.
When to call
Call us if nothing has tripped and the outlet is still dead, if a run of outlets has stopped, if a USB or smart outlet has failed, or if the safety switch will not stay on. If you need more outlets, or ones better suited to what you plug in, our power point installation service covers new and replacement outlets, USB points and weatherproof outdoor points. For a fault you want traced, see fault finding, or get in touch between 8:30am and 5pm, seven days.
If a whole room or part of the house is dead, half the house has no power walks through the likely causes.
FAQs
Questions on this
Why have several power points stopped working at once?
Power points are wired in a chain. A tripped safety switch or breaker will take out a group, and so can a loose connection at one outlet, which cuts power to every outlet after it.
Can a USB power point stop working while the socket still works?
Yes. The USB part has its own small electronics and can fail on its own. The outlet then needs replacing by an electrician.
Can I replace a power point myself?
No. A power point is fixed wiring, and only a licensed electrician may do fixed electrical work in WA.
Is a dead power point an emergency?
Not on its own. It becomes urgent if there are scorch marks, melting, a burning smell, crackling or heat. Then switch off at the main switch if safe and call an electrician.
Get a quote
Power point still dead?
Tell us which outlets are affected and whether anything tripped. We will tell you whether it is a quick fix or a fault to trace.