
Electrical faults
Switchboard upgrade cost in Perth: what drives the price
No two boards cost the same to replace. Here is what moves the price, and how to get a number you can rely on.
The cost of a switchboard upgrade depends on what is behind the door: how many circuits there are, what protection each one gets, whether the meter panel and main switch can stay, whether the mains carry the load, and whether you want the board ready for solar, a battery or an EV charger. If the supply or the meter has to change, Western Power gets involved and the job grows.
We do not publish a price for switchboards, because a figure without the board in front of us is a guess. A photo of the board with the door open, and a line about what you are planning, gets you a fixed price.
What changes the price
How many circuits, and what protects them
Every circuit needs protection, and the best arrangement is an RCBO per circuit: a combined breaker and safety switch, so a fault on one circuit only turns off that circuit. More circuits means more devices and more testing. Cheaper boards group several circuits under one RCD, which costs less and trips more of the house when anything goes wrong.
Board size and enclosure
If the new board fits in the existing meter box, the job is simpler. If it needs a larger enclosure, or the existing box is damaged or too small to work in safely, that is extra work.
The meter panel
Older Perth homes often have a dark meter panel that may contain asbestos. If the panel can stay, good. If it has to be replaced, the job changes, and asbestos needs handling correctly. This is one of the biggest single swings in price, and it is the first thing we look for in your photo.
The main switch and mains
The main switch may need replacing with the board. The consumer mains, the cable from the meter to the board, have to carry whatever you plan to add. If they are undersized, they get upgraded too.
Faults found in old wiring
Adding safety switch protection to old circuits sometimes exposes faults that were always there: damaged insulation, a nail through a cable, a perished light fitting. Those need fixing for the new protection to stay on. A good quote says how that will be handled.
Solar, battery and EV readiness
If solar, a battery or a car charger is on the way, leaving spare space and the right layout now costs little. Doing it later can mean a second visit and a second outage.
Western Power involvement
If the meter has to move, the supply needs upgrading, or a change from single-phase to three-phase is on the table, Western Power is involved in their part of the work. That adds steps and time, and the quote should say whether it applies and who is arranging what.
Access and extras
Sub-boards for a shed or granny flat, surge protection, a board in an awkward spot, or circuits that need tracing because nothing is labelled all add time.
How to get a real quote
- Take a clear photo of the switchboard with the door open, and one of the whole meter box.
- Tell us roughly how old the house is and whether anything has been added over the years.
- Tell us what you are planning in the next few years: solar, a battery, an EV charger, an air conditioner, a pool, a granny flat.
- Send it through the switchboard upgrades page or contact us.
From that we can usually tell you whether the panel can stay, whether the mains look up to it, and what the job involves. Where something cannot be judged from a photo, we say so and check on site before fixing the price.
Why the cheapest quote may cost more
Switchboard quotes are easy to make look cheap by leaving things out. Before comparing numbers, check whether each quote includes:
- An RCBO per circuit, or one RCD shared across several circuits.
- Testing of every circuit and the compliance paperwork.
- Labelling of every circuit.
- The meter panel, main switch and mains, or an exclusion for them.
- How faults found in old wiring are priced.
- Asbestos handling, if the panel has to come out.
- Spare space for solar, a battery or an EV charger.
- Removal and disposal of the old board.
- Any Western Power involvement, and who arranges it.
A quote that leaves several of those out is not a cheaper version of the same job. It is a different job. If you already have a quote and want a second opinion, our check my quote page is for exactly that.
When it is worth doing
If you still have ceramic fuses, read ceramic fuses and old switchboards first. If the board trips when big appliances run, signs your switchboard is overloaded or unsafe explains what that means. And if you are adding solar, a battery or a car charger, do the board at the same time.
FAQs
Questions on this
How much does a switchboard upgrade cost?
We quote each board rather than publish a figure, because the board, the panel, the mains and what you are planning all change the job. Send a photo of the switchboard and we can tell you what is involved and give you a fixed price.
How long does a switchboard upgrade take?
Most residential boards are done inside a day, with the power off for part of it. Longer if the meter panel or mains need replacing, or if Western Power has to be involved.
Is it cheaper to upgrade the switchboard with solar or a battery?
Usually, yes. Doing the board as part of another job avoids a separate visit and a second outage, and the board can be laid out for the new equipment from the start.
Do I need a switchboard upgrade for an EV charger?
Not always. It depends on whether the board has space, whether the protection suits the new circuit, and whether the mains carry the extra load. A photo of the board answers most of that.
Get a quote
Want a real number for your board?
Send a photo of the switchboard with the door open, and tell us what you are planning to add. You will get a fixed price with the scope written out.