Solar panels on a long garage roof and a shed roof on a semi-rural Mardella block, seen from above

Solar system sizes

13 kW solar systems in Perth

13 kW suits a large house that uses a lot of power in the day or is pairing panels with a battery. At this size the question is less whether you can generate enough and more whether you can use it.

  • 5 stars from 60+ reviews
  • 25 year workmanship warranty on solar and battery installs
  • Perth metro and surrounds
  • Our own installers, never subcontracted

A 13 kW system in Perth, in numbers

Average daily outputAbout 57 kWh a day, averaged over a year
Yearly outputAbout 20,880 kWh
PanelsAbout 30 panels at around 440 W
Roof spaceRoughly 60 m² of usable, mostly unshaded roof
STCs (federal rebate), 2026 install89 certificates, about $3,290 at ~$37 each

Who a 13 kW system suits

  • Large households with high daytime use
  • Homes adding a battery of 13 kWh or more
  • Two EVs, or one EV charged mostly at home in the middle of the day

What to watch for

  • Without a battery, much of the midday surplus is exported at 2c a kWh under DEBS, which does little for payback
  • Roof space: 13 kW needs around 30 panels and about 60 square metres of usable roof

Western Power's rules for a 13 kW system

Since 1 May 2026, a standard Western Power connection can carry up to 30 kVA of inverter capacity on a single or three-phase supply. The old 5 kVA limit is gone. What changed in its place is how exports are managed.

New and upgraded systems have to be able to be remotely managed through your retailer, which for most Perth homes is Synergy, if you want to take part in an export product such as DEBS. If you opt out, or the site has no reliable internet, the system is set to a fixed 1.5 kW export limit. Either way we lodge the application with Western Power and set the system up to suit.

DEBS currently pays 10c a kWh for exports between 3pm and 9pm and 2c at other times. Midday exports are worth little, so the bigger the system, the more the payback depends on using or storing what it makes.

Adding a battery later

If a battery is likely in the next few years, say so before the system is designed. A hybrid inverter, or space and cabling for one, costs far less on day one than retrofitting it. See the battery sizes: 10 kWh, 13.5 kWh, 20 kWh, 30 kWh.

Other system sizes

All solar system sizes

3 kW · 5 kW · 6.6 kW · 8 kW · 10 kW · 15 kW · 20 kW

Not sure which size fits? Read what size solar system a Perth home needs, or see our solar installation service.

Free quote

Get a quote on 13 kW

Please tell us your name.
Enter a 10 digit Australian number, with the area code for a landline.
We need the full address of the job, with the suburb and postcode.
Pick the closest one. Other electrical is fine.
A photo or PDF of your last bill helps us size it properly.

Rather talk it through? Ring (08) 6311 4066.

FAQs

13 kW solar questions

Is 13 kW too big for my house?

Only if you cannot use or store what it makes. Send a year of bills and we will compare your use with what 13 kW would generate in Perth, month by month, before recommending it.

Do I need three-phase power for 13 kW?

Not under Western Power's rules since 1 May 2026, which allow up to 30 kVA on a standard single or three-phase connection. A three-phase home simply has more room in its supply, so it is often the easier install.

What is the rebate on a 13 kW solar system in Perth?

A 13 kW system installed in Perth in 2026 creates 89 small-scale technology certificates (STCs): 13 kW × Perth's zone rating of 1.382 × 5 deeming years. At roughly $37 a certificate that is about $3,290 off the price. The certificate price moves, so your quote shows the exact figure.

How much does a 13 kW solar system cost in Perth?

We quote per job. Roof type, the inverter, your switchboard and whether you want the system battery-ready all move the number. Send a recent bill and a photo of your switchboard and you will get a real price with the STC discount already taken off.

Get a quote

Not sure what size you need?

Send a year of bills and a photo of your switchboard. We will size it from your use, not from a package list.