Several solar arrays across the tiled roofs of a large Yokine home with a pool, seen from above

Solar

What size solar system do I need in Perth?

Work out your daily use, decide how much solar should cover, and divide by 4.4. Here is how to do that properly, and when smaller is better.

Take your daily power use in kWh, decide how much of it you want solar to cover, and divide by 4.4. That is Perth's long-standing planning figure: each kW of panels makes about 4.4 kWh a day, averaged over a year. A house using 30 kWh a day needs about 7 kW on paper to match its use, and usually more once winter and a future battery are allowed for. A house that is empty all day with no battery plans needs less.

Roof space and Western Power's 5 kVA limit used to set the ceiling. Since 1 May 2026 a standard connection can take up to 30 kVA of inverters, so for most Perth homes the real limit is now how much of the output you can use or store. Exported solar earns 2c a kWh for most of the day under Synergy's DEBS, which is why we size for self-use and storage rather than to fill the roof.

Step 1: get a year of bills, not one

Each Synergy bill shows the kWh you used and the number of days in the period. One bill only tells you about one season. Summer air conditioning and winter heating can move a Perth household's use a long way, so add up a full year and divide by 365 to get your average daily use.

If you have already got solar, the bill only shows what you bought from the grid. Your inverter's monitoring shows what the panels made and what you used directly, and you need both to see your real consumption.

Step 2: split daytime use from evening use

When you use power matters as much as how much. Panels only cover what the house uses while they are generating. Everything after the panels fade, from mid to late afternoon in winter and later in summer, comes from the grid or a battery.

If you have an advanced (AMI) meter, your retailer can usually show your use through the day in intervals, which is the best data there is. Without it, think about the pattern: is anyone home in the day, does the pool pump or hot water run on a timer, does the air conditioning run through summer afternoons, does everything happen between 5pm and 9pm?

Daytime use is what solar covers directly. Evening use is what a battery could cover. Those two numbers drive everything after this.

Step 3: turn kWh into kW

Divide the daily kWh you want from solar by 4.4. Here is a worked example for a household using 30 kWh a day, 12 kWh of it in daylight and 18 kWh in the evening:

  • Panels only. Covering 12 kWh of daytime use is about 3 kW on paper. In practice you go bigger, because use does not line up neatly with the sun and winter output sits well below the annual average. A 6.6 kW system, at about 29 kWh a day on average, covers the daytime load through most of the year and exports the rest.
  • Panels and a 10 kWh battery. Now the panels also need to fill the battery: 12 plus 10 is 22 kWh a day, about 5 kW on the annual average. To fill it on most winter days, when evening use is highest, this house would be looking nearer a 10 kW system.

Those are averages. Shade, roof direction, heat and dust all take something off, so real systems usually come in a little under the planning figure.

Common sizes in Perth, in numbers

SystemAverage outputPanels (about 440 W)Usable roof
5 kWAbout 22 kWh a dayAbout 11About 20 m²
6.6 kWAbout 29 kWh a dayAbout 15About 30 m²
10 kWAbout 44 kWh a dayAbout 23About 45 m²
13 kWAbout 57 kWh a dayAbout 30About 60 m²
15 kWAbout 66 kWh a dayAbout 34About 70 m²
20 kWAbout 88 kWh a dayAbout 45About 90 m²

Step 4: check the roof

A modern panel is around 440 watts and about 2 square metres, so each kW needs two or three panels and roughly 4.5 square metres. That is usable roof: facing north, east or west, mostly free of shade, and clear of vents, skylights and the edge zones panels have to stay out of. A big roof can still have a small usable area once those are taken out.

What changed on 1 May 2026

Western Power's old 5 kVA inverter limit is gone. A standard single or three-phase connection can now carry up to 30 kVA of inverter capacity, which is why the 6.6 kW habit is fading. The trade-off is how exports are handled. A new or upgraded system must be able to be remotely managed through your retailer to join an export product such as DEBS. If you opt out, or the site has no stable internet, it gets a fixed 1.5 kW export limit. We explain both options in Western Power's connection rules and export limits.

Why 2c and 10c exports change the answer

DEBS pays 10c a kWh for exports between 3pm and 9pm and 2c at all other times. Panels make most of their power in the middle of the day, so most exports earn 2c. On Synergy's Home Plan you pay 33.2621c for every unit you buy. A kWh you use yourself is worth many times one you send to the grid.

So extra panels only pay their way when something will soak up the extra: a battery, an EV charged in the day, a pool pump or hot water on a midday timer. If none of those apply, a bigger system mostly makes more 2c exports.

Sizing for a battery or EV you have not bought yet

If a battery is likely in the next few years, size the panels for it now and ask for a hybrid or battery-ready inverter. Adding panels later usually means a second inverter or a replacement, and any upgrade has to meet the new connection rules. Our guide to what size battery a Perth home needs covers the storage side.

An EV works the same way. Your car's app shows its energy use per 100 km, which turns your weekly driving into kWh. Charged at home in the middle of the day, that is a large, flexible daytime load, and it is often what justifies a 13 kW or 15 kW array. See EV charging at home. Very large homes and small businesses with steady daytime load can justify 20 kW.

When smaller is the right answer

If the house is empty all day, there is no battery or EV on the horizon, the roof is small or shaded, or you are selling in a couple of years, a 5 kW or 6.6 kW system can be the better buy. We will say so on the quote, even when other quotes on the table are bigger.

Send us a year of bills and a photo of your switchboard and we will size a solar installation from your own use, month by month.

FAQs

Questions on this

How many solar panels do I need?

Divide the system size in kW by about 0.44, the output of a typical 440 watt panel. A 6.6 kW system is about 15 panels and a 10 kW system about 23. Work out the kW from your power use first, then check the roof can fit that many panels.

Is there a solar system size calculator I can trust?

Any calculator does the same sum: your daily use, the share you want solar to cover, divided by Perth's planning figure of 4.4 kWh per kW per day. The answer is only as good as the use figure you give it, so start from a full year of bills rather than a guess.

Can I install more than 6.6 kW in Perth?

Yes. Since 1 May 2026 a standard Western Power connection can take up to 30 kVA of inverter capacity on single or three phase. Your switchboard, your supply and how much you can use or store decide the sensible size.

Should I oversize my solar for a battery later?

Usually, if the battery is likely within a few years. Panels and a battery-ready inverter cost far less on day one than adding them later, when the upgrade also has to meet Western Power's new connection rules.

Get a quote

Want it sized from your bills?

Send a year of power bills and a photo of your switchboard. We will work out the size from your use, and tell you if smaller is the better answer.