A small solar array on a grey Colorbond roof in Byford

Solar system sizes

5 kW solar systems in Perth

A 5 kW system is the small end of what we install now. It suits a house that is empty most of the day, a small roof, or someone adding to what they already have.

  • 5 stars from 60+ reviews
  • 25 year workmanship warranty on solar and battery installs
  • Perth metro and surrounds
  • Our own installers, never subcontracted

A 5 kW system in Perth, in numbers

Average daily outputAbout 22 kWh a day, averaged over a year
Yearly outputAbout 8,030 kWh
PanelsAbout 11 panels at around 440 W
Roof spaceRoughly 20 m² of usable, mostly unshaded roof
STCs (federal rebate), 2026 install34 certificates, about $1,260 at ~$37 each

Who a 5 kW system suits

  • One or two people, out at work most weekdays
  • A small or heavily shaded roof with room for about a dozen panels
  • Topping up an older system rather than replacing it

What to watch for

  • Most Perth households outgrow 5 kW once they add air conditioning, a pool pump or an EV
  • If a battery is on the cards in the next few years, a 5 kW array leaves little surplus to charge it

Western Power's rules for a 5 kW system

Since 1 May 2026, a standard Western Power connection can carry up to 30 kVA of inverter capacity on a single or three-phase supply. The old 5 kVA limit is gone. What changed in its place is how exports are managed.

New and upgraded systems have to be able to be remotely managed through your retailer, which for most Perth homes is Synergy, if you want to take part in an export product such as DEBS. If you opt out, or the site has no reliable internet, the system is set to a fixed 1.5 kW export limit. Either way we lodge the application with Western Power and set the system up to suit.

DEBS currently pays 10c a kWh for exports between 3pm and 9pm and 2c at other times. Midday exports are worth little, so the bigger the system, the more the payback depends on using or storing what it makes.

Adding a battery later

If a battery is likely in the next few years, say so before the system is designed. A hybrid inverter, or space and cabling for one, costs far less on day one than retrofitting it. See the battery sizes: 10 kWh, 13.5 kWh, 20 kWh, 30 kWh.

Other system sizes

All solar system sizes

3 kW · 6.6 kW · 8 kW · 10 kW · 13 kW · 15 kW · 20 kW

Not sure which size fits? Read what size solar system a Perth home needs, or see our solar installation service.

Free quote

Get a quote on 5 kW

Please tell us your name.
Enter a 10 digit Australian number, with the area code for a landline.
We need the full address of the job, with the suburb and postcode.
Pick the closest one. Other electrical is fine.
A photo or PDF of your last bill helps us size it properly.

Rather talk it through? Ring (08) 6311 4066.

FAQs

5 kW solar questions

Is 5 kW enough for a family home in Perth?

For most families, no. A typical Perth family uses well over what 5 kW produces across a year once the evening load is counted. It can still be the right size when the roof is small or the budget is fixed, and we will say so on the quote.

Can I add panels to a 5 kW system later?

Often, yes, but it is rarely as cheap as getting the size right first. Adding panels usually means a second inverter or a replacement, and since 1 May 2026 an upgrade has to meet Western Power's new connection rules.

What is the rebate on a 5 kW solar system in Perth?

A 5 kW system installed in Perth in 2026 creates 34 small-scale technology certificates (STCs): 5 kW × Perth's zone rating of 1.382 × 5 deeming years. At roughly $37 a certificate that is about $1,260 off the price. The certificate price moves, so your quote shows the exact figure.

How much does a 5 kW solar system cost in Perth?

We quote per job. Roof type, the inverter, your switchboard and whether you want the system battery-ready all move the number. Send a recent bill and a photo of your switchboard and you will get a real price with the STC discount already taken off.

Get a quote

Not sure what size you need?

Send a year of bills and a photo of your switchboard. We will size it from your use, not from a package list.